TR CU 004/2011关于低压设备安全的法规——认证与符合性声明
TR CU 004/2011法规下载

技术法规TR CU 004/2011《低压设备安全》规定了电气设备的安全最低要求，旨在保护生命、健康、财产及环境安全，同时防止消费者受到误导性信息的影响。

根据技术法规TR CU 004/2011，电气设备的设计与制造应确保在正常使用条件下具备以下防护能力：

    触电
    高温
    火灾
    机械伤害

产品必须符合《低压设备安全技术法规TR CU 004/2011》的要求，方可在俄罗斯及欧亚市场投放。

尽管该技术法规TR CU 004/2011的要求已与《低压指令2014/35/EU》协调一致，但两者并非完全相同。

2011年8月16日通过
2013年2月15日生效

自2015年3月15日起，《技术法规TR CU 004/2011》在关税同盟境内最终废止了包括GOST或俄罗斯TR在内的国家技术法规标准。低压设备安全技术法规CU TR 004/2011：主要定义
俄罗斯、白俄罗斯和哈萨克斯坦海关联盟框架内低压设备安全技术法规TR CU 004/2011，根据海关联盟委员会2011年8月16日第768号法令，于2013年2月15日重新生效。
适用范围及相关产品
市场准入证书 CU TR 004 2011
    需进行符合性声明与认证的设备如下：
    铁制或钢制卫生洁具及其部件；
    液体泵（无论是否装有计量装置）；液体提升机；
    空气或真空泵、空气或其他气体压缩机及风机；带风机的通风或循环罩（无论是否装有过滤器）；
    冰箱、冰柜及其他制冷或冷冻设备（电动或其他）；除8415章空调机外的热泵；
    离心机，包括离心干燥机；用于液体或气体的过滤或净化机械及装置；
    洗碗机；用于清洗或干燥瓶罐及其他容器的机械；用于灌装、封口、密封或贴标瓶罐、罐头、盒子、袋子及其他容器的机械；用于封盖瓶罐、罐头、管子及类似容器的机械；其他包装或裹包机械（包括热收缩裹包机械）；机械；
    用于通过第8442章所述印版、印版滚筒及其他印刷部件进行印刷的印刷机械；其他印刷机、复印机及传真机（无论是否组合）；其零部件及附件；
    真空吸尘器；

    无线电广播或电视的传输装置，无论是否包含接收装置或声音录制或重放装置；电视摄像机、数码相机和摄像录像机；
    用于切换或保护电路，或用于连接电路的电气装置（例如开关、继电器、保险丝、浪涌抑制器、插头、插座、灯座及其他连接器、接线盒），电压不超过1000伏；光纤连接器；
    配备两个或更多第8535或8536项设备，用于电力控制或配电的板、面板、控制台、桌、柜及其他基座，包括内置第90章仪器或设备的基座，以及数值控制装置（第8517项开关装置除外）；
    带钟表机芯或同步电机的定时开关；
    节日、嘉年华或其他娱乐用品，包括魔术道具和新奇玩笑玩具。

在将产品/设备投放市场之前，制造商/代表应：

    遵守基本健康和安全要求（技术法规CU TR 004/2011）
    执行符合性评估程序
    获取符合性声明证书，并确保该文件随附于产品
    确保产品带有EAC标志 

实际操作中，任何进入关税同盟市场（销售网点及投产现场）的产品在清关后均须附有符合性证书/声明的原件或经认证的副本。
我们提供以下解决方案：
符合性声明TR CU 004 2011

    获取符合性证书/声明；
    提供产品标识咨询及证书/声明所需文件指导；
    协调并支持授权专家在生产现场实施检验；
    在授权实验室对产品进行测试分析；
    制定自愿性认证的技术规范与参考体系；  

The technical regulation TR CU 004/2011 On safety of low-voltage equipment represents the minimum safety requirements for electrical equipment in order to protect life, health, property, and environmental as well as protecting consumers against misleading information.

According the Technical Regulation TR CU 004/2011, electrical devices shall be designed and manufactured in such a way that when used as intended they protect against the following:

• electrocution

• heat

• fire

• mechanical injuries

The products must comply with the requirements of the Technical Regulation TR CU 004/2011 On safety of low-voltage equipment in order to be placed on the Russian and Eurasian market.

Although the requirements of the technical regulation TR CU 004/2011 have been coordinated with the requirements of the Low Voltage Directive 2014/35/EU, they are not identical.

Adopted on August 16, 2011
Came into force on February 15, 2013

As of 15 March 2015, the Technical Regulation TR CU 004/2011 finally definitively abolished the national standards of technical regulation such as GOST or the Russian TR in the territory of the Customs Union.

Technical Regulations TR CU 004/2011 on the safety of low-voltage equipment: main definitions

Technical  Regulations TR CU 004/2011 on the safety of low-voltage equipment in  the framework of the Customs Union between Russia, Belarus and  Kazakhstan by Decree No. 768 of 16/08/2011 of the Commission of the  Customs Union returned in force on 15th February 2013. 

Scope and relevant products 

Market Launch

• Equipment subject to the Declaration and Certification of Conformity are as follows:

• Sanitary ware and parts thereof, of iron or steel;

• Pumps for liquids, whether or not fitted with a measuring device; liquid elevators;

• Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorp
  orating a fan, whether or not fitted with filters;

• Refrigerators, freezers and other refrigerating or freezing  equipment, electric or other; heat pumps other than air-conditioning  machines of heading 8415;

• Centrifuges, including centrifugal dryers; filtering or purifying machinery and apparatus, for liquids or gases;

• Dishwashing machines; machinery for cleaning or drying bottles or  other containers; machinery for filling, closing, sealing or labelling  bottles, cans, boxes, bags or other containers; machinery for capsuling  bottles, jars, tubes and similar containers; other packing or wrapping  machinery (including heat-shrink wrapping machinery); machinery;

• Printing machinery used for printing by means of plates, cylinders  and other printing components of heading 8442; other printers, copying  machines and facsimile machines, whether or not combined; parts and  accessories thereof;

• Vacuum cleaners;

• Transmission apparatus for radio-broadcasting or television, whether  or not incorporating reception apparatus or sound recording or  reproducing apparatus; television cameras, digital cameras and video  camera recorders;

• Electrical apparatus for switching or protecting electrical  circuits, or for making connections to or in electrical circuits (for  example, switches, relays, fuses, surge suppressors, plugs, sockets,  lamp holders and other connectors, junction boxes), for a voltage not  exceeding 1 000 V; connectors for optical;

• 
  

• Boards, panels, consoles, desks, cabinets and other bases, equipped  with two or more apparatus of heading 8535 or 8536, for electric control  or the distribution of electricity, including those incorporating  instruments or apparatus of Chapter 90, and numerical control apparatus,  other than switching apparatus of heading 8517;

• Time switches, with clock or watch movement or with synchronous motor;

• Festive, carnival or other entertainment articles, including conjuring tricks and novelty jokes.

Prior to launching products/equipment onto the market, the manufacturer / representative should:

• comply with basic health and safety requirements (Technical Regulations CU TR 004/2011)

• apply procedures for evaluation of conformity

• obtain the  certificate: declaration  of conformity and make sure that the latter is included in products

• make sure that products bear the EAC mark 

In practice, any products coming onto the Customs Union markets  (sales outlets and commissioning sites) after customs clearance should  include originals / certified copies of certificates/declarations of  conformity.

We offer solutions for:

• obtaining certificates/declarations of conformity;

• taking advice on product labeling, and on documents required for issuing certificates/declarations of conformity;

• organizing and supporting on-site inspections at the point of production by the authorized experts;

• testing and analyzing your products at the authorized laboratories;

• developing specifications and reference systems for voluntary certification;  

海关联盟EAC认证中心/上海经合工业设备检测有限公司

公司地址：上海浦东新区高科东路777弄1号楼2017室

联系我们：上海经合工业设备检测有限公司/俄罗斯EAC证机构中国代表处
电话：021-36411223   36411293
邮件：eac@cu-tr.org 
手机微信：18621327282