TR CU 010/2011《机械安全》——认证与符合性声明
TR CU 010/2011 法规下载
技术法规TR CU 010/2011《机械设备安全》规定了机械设备在其整个生命周期（包括设计、制造、安装、储存、运输、调试、运行、报废及处置阶段）的安全最低要求。其核心在于保护生命、健康、财产及环境安全。

符合《机械设备安全技术法规TR CU 010/2011》的要求，是成功进入俄罗斯及欧亚市场的必要前提。

尽管该技术法规的要求已与《机械指令2006/42/EC》协调，但两者并非完全一致。

2011年10月18日通过
2013年2月15日生效

2015年3月15日，《技术法规TR CU 010/2011》使国家技术法规标准（如GOST或俄罗斯TR）失效。
TR CU 010/2011适用范围：机械设备安全

技术法规TR CU 010/2011适用于各类机械设备。根据该法规，机械设备指：

    为特定用途（如加工、运输或包装）组装成整体单元的一系列连续部件或组件，其中至少一个部件通过相应驱动机构、控制链由动力源驱动。

此外，用于高危行业的设备须依据技术法规TR ZU 010/2011进行符合性评估。

二手设备及零部件/备件不适用任何EAC符合性评估。
符合性评估流程

针对《机械设备安全》TR CU 010/2011要求的符合性评估，以EAC认证或EAC声明的形式实施。

机械设备EAC认证须由经认可的认证机构实施。

设备投产前的EAC符合性声明评估基于企业自证材料，并需经认可机构参与审核。
应要求，EAC符合性声明可替换为EAC认证。

随附文件

机械设备符合性评估的随附文件应以俄语或关税同盟成员国的官方语言提交，并应包括：

    详细产品描述
    产品名称
    技术护照
    安全评估
    操作说明书
    技术图纸
    技术数据表
    测试报告
    质量管理体系证书副本

TR CU 010/2011 "Safety of machinery" - certification and declaration of conformity 
TR CU 010/2011 法规下载
The Technical Regulation TR CU 010/2011 On safety of machinery and equipment stipulates minimum requirements for the safety of machinery and equipment during their entire lifecycle: during their design, manufacture, installation, storage, transport, commissioning, operation, decommissioning, and disposal. The focus is on protecting life, health, property and the environment.

Compliance with the requirements of the technical regulation TR CU 010/2011 On safety of machinery and equipment is a prerequisite for successful access to the Russian and Eurasian market.

Although the requirements of the Technical Regulation TR CU 010/2011 have been coordinated with the requirements of the Machinery Directive 2006/42/EC, they are not identical.

Adopted on October 18, 2011
Came into force on February 15, 2013

On March 15, 2015, the Technical Regulation TR CU 010/2011 rendered the national standards of the technical regulation such as GOST or Russian TR invalid.
Area of application of TR CU 010/2011 On safety of machinery and equipment

The Technical Regulation TR CU 010/2011 applies to machines and equipment. According to the Technical Regulation TR CU 010/2011, machines or equipment is

    a series of continuous parts or components assembled for a concrete application (e.g. processing, transporting or packaging) into an overall unit, at least one of which is driven by a power source through corresponding driving mechanisms, control chains.

In addition equipment intended for use in industries with increased dangers is subject to conformity assessment under Technical Regulation TR ZU 010/2011.

Used machines as well as components/ spare parts do not fall under any EAC conformity assessments.
Conformity assessment process

The conformity assessment with the requirements of TR CU 010/2011 On safety of machinery and equipment is carried out in the form of an EAC Certification or EAC Declaration.

The EAC certification of machinery and equipment is carried out by an accredited certification body.

The conformity assessment of machinery and equipment prior to commissioning in the form of an EAC Declaration is based on own evidence and with the involvement of an accredited body.

Upon request, the EAC Declaration can be replaced by an EAC Certification.
Accompanying documents

The accompanying documents for the conformity assessment of machinery and equipment shall be submitted in Russian language or in the official language of the member state of the customs union and should include:

    detailed product description
    product name
    technical passport
    safety assessment
    instruction manual
    technical drawings
    technical data sheet
    test reports
    a copy of the quality management system certificate

海关联盟EAC认证中心/上海经合工业设备检测有限公司

公司地址：上海浦东新区高科东路777弄1号楼2017室

联系我们：上海经合工业设备检测有限公司/俄罗斯EAC证机构中国代表处
电话：021-36411223   36411293
邮件：eac@cu-tr.org 
手机微信：18621327282