EAC认证集团(俄罗斯认证测试中心)中国代表处

ОБЩЕСТВО С ОГРАНИЧЕННОЙ ОТВЕТСТВЕННОСТЬЮ "ТЕСТ СЕРТ"

аттестат аккредитации № RA.RU.11НА27,RA.RU.21НС54,RA.RU.21НУ14


24小时认证热线:021-36411293

skype:gostchina

微信:18621862553

eac@cu-tr.org

TR CU 016/2011 On safety of appliances burning gaseous fuels EAC certificate
来源: | 作者:pmtef1337 | 发布时间: 2018-11-20 | 1324 次浏览 | 分享到:
TP TC 016 EAC certificate ,CU-TR 016 EAC certification,TR CU 016/2011 gas heating (heaters, etc. combined with water circuit, convectors, stoves, hot air heating, air conditioning with built-in gas hot-air generators) EAC Certificate,appliances used for cooking, heating, water heating, cooling, lighting or washing EAC Certificate,appliances used for cooking, heating, water heating, cooling, lighting or washing EAC Certificate,gas-heated storage water heater EAC Certificate,portable gas heaters and tripods (tourism) EAC Declaration,gas lamps EAC Declaration,gas boilers (power up to 1000 kw) EAC Certificate,gas boilers (power over 1000 kw) EAC Certificate,appliances for use in large kitchens (kettles, kitchens, roasting pans, deep fryers, tea kettles etc.) EAC Certificate,gas operated air heaters with heat recovery function EAC Certificate,pressure regulators EAC Certificate,gas pressure regulator EAC Certificate,device for automatic ignition EAC DeclarationMsafety, control and regulation devices EAC Declaration,flexible pipe connections EAC Certificate

The technical regulation of the Customs Union TR CU 016/2011 On safety of appliances burning gaseous fuels sets mandatory safety requirements that apply to gas-powered devices for the protection of life, health of humans and animals, the environment, and property. It also serves to prevent misleading actions against the consumer, as well as to ensure energy efficiency and resource conservation.
The TR CU 016/2011 is intended to ensure the uniform application and enforcement of the requirements for gas-powered appliances in the territory of the Customs Union, as well as the free movement of goods.

Adopted on December 9, 2011
Entered into force on February 15, 2013

The gas-powered equipment may be placed on the market of Russia and the EAEU only if they comply with the requirements of this and other EAEU technical regulations, if applicable.

TR CU 016/2011 is a counterpart to the EC Directive 2009/142/EC On gas appliances.

Application area of TR CU 016/2011

TR CU 016/2011 applies to:

  • equipment intended for food preparation, heating, hot water supply including equipment, as components of combiners
  • block-type combustion engines and gas-powered equipment with block-type combustion engines, which are numbered numerically in the regulations
  • equipment intended for equipment installation, which are in circulation independently of the latter and are listed in the regulations. control units, controllers and safety devices


List of gas appliances which are subject to the technical rules: Conformity assessment form
gas heating (heaters, etc. combined with water circuit, convectors, stoves, hot air heating, air conditioning with built-in gas hot-air generators) EAC Certificate
appliances used for cooking, heating, water heating, cooling, lighting or washing EAC Certificate
appliances used for cooking, heating, water heating, cooling, lighting or washing EAC Certificate
gas-heated storage water heater EAC Certificate
portable gas heaters and tripods (tourism) EAC Declaration
gas lamps EAC Declaration
gas boilers (power up to 1000 kw) EAC Certificate
gas boilers (power over 1000 kw) EAC Certificate
appliances for use in large kitchens (kettles, kitchens, roasting pans, deep fryers, tea kettles etc.) EAC Certificate
gas operated air heaters with heat recovery function EAC Certificate
pressure regulators EAC Certificate
gas pressure regulator EAC Certificate
device for automatic ignition EAC Declaration
safety, control and regulation devices EAC Declaration
flexible pipe connections EAC Certificate

According to TR CU 016/2011 no conformity assessment needed for:

The technical regulation TR CU 016/2011 applies to non-industrial gas-powered devices.
The rules of the TR CU 016/2011 does not apply to following devices:

  • steam boilers with pressure up to 0,07 MPa and boilers with temperatures up to 115 ° С
  • equipment intended for use in industrial processes and in industrial plants, with the exception of gas-operated equipment, listed in Annex 1 to TR 016/2011
  • equipment using gas as motor fuel

The conformity assessment process

The conformity assessment with the requirements of the technical regulation TR CU 016/2011 On safety of appliances burning gaseous fuels is mandatory and occurs in the following forms:

  1. EAC Declaration
  2. EAC Certificate

At the request of the applicant, the EAC Declaration can be replaced with the EAC Certification. This can be relevant if the applicant is lacking his own proof or is not sufficient to prove the compliance with the requirements of this technical regulation.
The EAC conformity assessment of gas-powered equipment is carried out according to one of the three procedures, at the choice of the applicant: for the serial delivery, for single-supply and for series production.

Accompanying documents

The supporting documents must be submitted in Russian or in the official language of the Member State of the Customs Union. The accompanying documents include:

  • technical description and documentation
  • instruction manual
  • test reports
  • data sheet
  • assembly drawing
  • a copy of the certificate of conformity
  • a copy of the quality management system certificate
  • protocols of the manufacturing audit for serial production

EAC marking

TR CU 016/2011 On safety of appliances burning gaseous fuels

The products declared according to TR CU 016/2011 must be marked with the EAC conformity marking before launching the market. The conformity marking shall be affixed to each gas-powered unit as well as the corresponding operating documents. It is also permissible to place the marking on the packaging and the corresponding operating documents exclusively where the marking of the gas-powered equipment is impossible. In this case, the marking must be carried out on the gas- powered equipment in such a way that it is easily recognizable and readable during the entire service cycle. The appropriate marking may only be carried out if the corresponding equipment meets the requirements of all the technical regulations under which it falls.

Period of validity of the EAC Certificate

The validity of the EAC declaration for products of the light industry is 3 years.

TR CU 016/2011 On safety of light industry products in the Russian language

海关联盟EAC认证中心/上海经合工业设备检测有限公司

公司地址:上海浦东新区高科东路7771号楼2017

 公司网址:www.gost-r.com.cn    www.cu-tr.org   www.cu-tr.com 

ICQ:597687662  480355369

e-mail:    eac@cu-tr.org   gost-r@163.com

Skype:gostchina

      
  微信号 扫一扫联系我              公众号 扫一扫 关注我