elevators EAC certificate, EAC declaration,TP TC 011/2011 ,EAC certificate,CU-TR 011/2011elevators ,EAC certificate, TR CU 011/2011elevators  damping devices EAC certificate,elevators interceptor,elevators  speed monitor,elevators  closures for shaft door,elevators safety hydraulic valve,EAC certificate, EAC declaration,CU-TR declarations,TR CU declarations,cu-tr certificate, tr cu certificate,CU certificate,EAEU certificate

The technical regulation of the Customs Union TR CU 011/2011 Elevator safety sets the binding requirements that are applied to the elevator safety in order to protect life, health, property and to prevent misleading actions.

The TR CU 011/2011 should ensure the uniform application and enforcement of the requirements for lifts in the territory of the customs union as well as the free movement of goods.

In accordance with the technical requirements of TR CU 011/2011, elevators must be designed, produced and installed in such a way as to ensure safety during the intended life.

Adopted on October 18, 2011
Entered into force on February 15, 2013

Until 15 November 2013, the elevators could be put on the market in accordance with the national standards of the Member States of the Customs Unions, such as TR or GOST in case of Russia.

The elevators which have been put into operation before the entry into force of the TR CU 011/2011 and which have not exhausted the approved service life must be brought into line with the requirements of the technical regulation.

Application area of TR CU 011/2011

The TR CU 011/2011 applies to all elevators and elevators safety devices intended for use in the Member States of the Customs Union, including:

• damping devices
• interceptor
• speed monitor
• closures for shaft door
• safety hydraulic valve

TR CU 011/2011 does not include the elevators:

• in mining and coal industry
• on ship and other swimming means
• on the platforms for exploration and drilling in the sea
• on airplanes and aircraft
• with rack or pinion winch mechanism
• special for military purposes

The conformity assessment process

The conformity assessment with the requirements of the TR CU 011/2011 Elevator safety is carried out in the form of a compulsory EAC Certification

The EAC Certification for elevators and elevator safety equipment is carried out by a notified body.

The conformity assessment of an elevator before commissioning takes place in the form of the EAC Declaration on the basis of its own documentation and with the involvement of a notified body.

Accompanying documents

The supporting documents must be submitted in Russian or in the official language of the Member State of the Customs Union. The accompanying documents include:

• instruction manual
• data sheet
• an assembly drawing
• electrical circuit with list of elements
• hydraulic plan
• a copy of the conformity assessment of the elevator or elevator safety device
• a copy of the quality management system certificate

EAC Kennzeichnung:

The elevators and the safety elevator devcices, which conformity with the requirements of TR CU 011/2011 has been confirmed, shall be marked with the EAC marking of the Customs Union. The marking itself must be affixed directly to the product or to the corresponding shipping documents.

The EAC mark is installed in such a way as to ensure a sharp and clear recognition throughout the life of the elevator or elevator safety device.

The following information must also be attached to the elevator:

• manufacturer name
• trademark
• ID-number of the elevator
• year of manufacture

Period of validity of the EAC Certificate

The validity of the EAC declaration for elevators and elevators safety devices is 5 years and can be prolonged by a notified body.

海关联盟EAC认证中心/上海经合工业设备检测有限公司

公司地址：上海浦东新区高科东路777弄1号楼2017室

 公司网址：www.gost-r.com.cn    www.cu-tr.org   www.cu-tr.com 

ICQ:597687662  480355369

e-mail:    eac@cu-tr.org   gost-r@163.com

Skype:gostchina

TR CU 011/2011 Elevator safety in the Russian language

      

  微信号 扫一扫联系我              公众号 扫一扫 关注我