CU-TR 010/2011 machinery products EAC certificate,machinery EAC declaration,machinery CU-TR declarations, CU-TR 010/2011 CU certificate,TP TC 010/2011EAEU certificate, TR CU 010/2011 On safety of machinery and equipment

EAC认证集团（俄罗斯认证测试中心）中国代表处

ОБЩЕСТВО С ОГРАНИЧЕННОЙ ОТВЕТСТВЕННОСТЬЮ "ТЕСТ СЕРТ"

аттестат аккредитации № RA.RU.11НА27,RA.RU.21НС54,RA.RU.21НУ14

24小时认证热线：021-36411293

skype:gostchina

微信：18621862553

eac@cu-tr.org

TR CU 010/2011 On safety of machinery and equipment

来源: | 作者:pmtef1337 | 发布时间: 2018-11-20 | 1677 次浏览 | 分享到:

CU-TR 010/2011 machinery products EAC certificate,machinery EAC declaration,machinery CU-TR declarations, CU-TR 010/2011 CU certificate,TP TC 010/2011EAEU certificate, TR CU 010/2011 On safety of machinery and equipment

The technical regulation TR CU 010/2011 On safety of machinery and equipment stipulates minimum requirements for the safety of machinery and equipment during their entire lifecycle: during their design, manufacture, installation, storage, transport, commissioning, operation, decommissioning, and disposal. The focus is on life, health, property and the environment.

Compliance with the requirements of the technical regulation TR CU 010/2011 On safety of machinery and equipment is a prerequisite for successful access to the Russian and Eurasian market.

Although the requirements of the technical regulation TR CU 010/2011 have been harmonized with the requirements of the Machinery Directive 2006/42/EC, they are not identical.

Adopted on October 18, 2011
Entered into force on February 15, 2013

On March 15, 2015, the technical regulation TR CU 010/2011 set the national standards of the technical regulation such as GOST or Russian TR definitively out of force.

Application area of TR CU 010/2011 On safety of machinery and equipment

The technical regulation TR CU 010/2011 applies to machines and equipment. According to the technical regulation TR ZU 010/2011, a machine or equipment is

a series of contiguous parts or assemblies put together for a concrete application (e.g., machining, processing, transport, or packaging) into an overall unit, at least one of which is driven by a power source through corresponding drive trains, control chains.

Conformity assessment process

The conformity assessment with the requirements of the TR CU 010/2011 On safety of machinery and equipment is carried out in the form of an EAC Certification or EAC Declaration.

The EAC certification of machinery and equipment is carried out by an accredited certification body.

The conformity assessment of machinery and equipment prior to commissioning in the form of the EAC Declaration is based on own evidence and with the involvement of a notified body.

Upon request, the EAC Declaration can be replaced by the EAC Certification.

Accompanying documents

The accompanying documents for the conformity assessment of machinery and equipment shall be submitted in the Russian language or in the official language of the Member State of the customs union and shall include:

detailed product description
product designation
technical pass
safety assessment
instruction manual
technical drawings
technical data sheet
test reports
a copy of the quality management system certificate

According to TR CU 010/2011 the following devices are subject to the EAC Certification:	According to TR CU 010/2011 the following devices are subject to the EAC Declaration:	According to TR CU 010/2011 no conformity assessment needed for:
woodworking machines for household use off-road vehicles, engine sleds, and their trailers workshop equipment agricultural machinery small horticultural and forestry equipment machines for livestock, poultry farming and feed production mechanized tools machines for forestry equipment for trade and gastronomy equipment for mining mine transport machines rigs equipment for ventilation of mines conveyors, lifting equipment	turbines and gas turbines ventilation equipment crushing plants diesel generators loaders conveyor belts electric hoists industrial vehicles without rails cryogenic equipment, compressors, refrigerators, autogen, gas treatment gas-powered equipment for metalworking and coating gas cleaning systems and dust filters oil pumping and oiling equipment painting equipment equipment for liquid ammonia equipment for the treatment and purification of drinking water metalworking machines woodworking machines other than household machines welding equipment and equipment for gastotherapeutic treatment industrial tractors fork-lift truck cycles soilmovers construction machinery and equipment equipment for the building materials industry industrial laundry machines machinery and equipment for public utilities industrial fans industrial conditioners air heater and air cooler printing presses boiler operated with liquid and solid fuels water heaters and heating systems operated with liquid and solid fuels industrial fittings bench tool milling, sawing and grinding tools equipment for the light industry: textile, chemical, food and pulp, and paper industries	telecommunication equipment medical facilities equipment for the car industry complex means of transport sea and high sea vessels aerospace engineering railway infrastructure entertainment attractions weapons and weapon technology equipment for disabled people forestry and agricultural tractors and their trailers drilling platforms

It should be noted that the products, regardless of whether or not they are subject to conformity assessment according to the technical regulation TR CU 010/201, might also comply with other directives, such as TR CU 004/2011 On the safety of low-voltage equipment or TR CU 020/2011 On electromagnetic compatibility.

EAC marking

TR CU 010/2011 On safety of machinery and equipment

The products which conformity with the requirements of TR CU 010/2011 has been confirmed shall be marked with the EAC marking of the Customs Union. The placing on the market of products without corresponding marking can be punished with a fine and with a confiscation.